|
Select Tab to Verify
Course Approval Status:
ABO # STWQO013-1
APPROVED for 2 Hour(s) of CE
New York - (#04-39) DISP
APPROVED for 2 Hour(s) of CE
FL - (#20-165021) Technical
NOT APPROVED for 1 Hour(s) of CE
Tennessee Approval Pending
PENDING for 2 Hour(s) of CE
Nevada - SP
APPROVED for 2 Hour(s) of CE
Ohio - SP
APPROVED for 2 Hour(s) of CE
Georgia - (SP)
APPROVED for 2 Hour(s) of CE
Ontario Opticians
NOT APPROVED for Hour(s) of CE |
| Author Information |
 |
| E-Mail Author |
23
46
The Requirements for Passing are stringent. Failure consists of any of the following: Any posterior displacement of the lens completely through the lens holder. This would indicate that the lens was able to flex; The lens must not fracture, that plainly would indicate that the lens was not strong enough to withstand impact; Any detachment of a portion of the lens from its inner surface, for example, no chips or pieces of lens may flake or come off the lens; Any penetration of the lens – meaning that the lens must hold back the ¼” steel ball. The ball may not pass through the lens. |
|
