What You Need To Know About The New ANSI Z87.1-2003 Standard
Approvals

Select Tab to Verify Course Approval Status:

ABO      # STWQO013-1
APPROVED for 2 Hour(s) of CE

New York - (#04-39) DISP
APPROVED for 2 Hour(s) of CE

FL - (#20-165021) Technical
NOT APPROVED for 1 Hour(s) of CE

Tennessee Approval Pending
PENDING for 2 Hour(s) of CE

Nevada - SP
APPROVED for 2 Hour(s) of CE

Ohio - SP
APPROVED for 2 Hour(s) of CE

Georgia - (SP)
APPROVED for 2 Hour(s) of CE

Ontario Opticians
NOT APPROVED for Hour(s) of CE


 
Author Information
E-Mail Author

 

Slide number:
      
33
Total slides in this course:
                 
46

Return to course menu


High Velocity Impact Test

The testing is first performed on a frontal plane. The first test is performed at 15 degrees on the nasal side. The test is then performed by placing a frame with lenses on the head form and impacting it at 0 degrees. The test is repeated with a new frame at 15 degrees. This is repeated at increments of 15 degrees until 90 degrees is reached, for a total of 8 frames, with lenses, being tested.
 
First Slide      Previous Slide       Next Slide     Last Slide


Go to slide:
1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25
  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42  43  44  45  46
 Test